September 2014.
Buying this camper has been an exciting adventure for us. Us, being mostly me, and I hadn't been set out to do so for very long but the opportunity kind of fell in our lap. Once my husband realized the tools he would be acquiring in order for this remodel to move ahead - now he's on board and then some! Typical male, no? In fact, he is already starting to discuss the 'next' camper! Ha!
Today was a big preparation day. I have been researching, cost comparing, and in general just looking around for supplies and trying to decide on how we want to do this redo. This weekend we started purchasing supplies for the basic structure, as virtually all of what is there is not worth salvaging. The trailer is mainly 1x2s held together by staples, a little glue, and that's about it. Oh - can't forget to throw in a lot of wood rod, some black mold, warping, etc. We went back and forth on whether to beef up the strength of the structure by using 2x2s, 2x4s, compared red wood versus pine, etc. but in the end in the name of weight and cost, we've decided to stay with the 1x stock but will mostly be using 1x3 & 1x4s. And we have decided pine will be fine. The redwood we were finding was poor quality, twisting, bowed, and fairly costly. It survived this long with flimsy wood - I guess it will be a-ok with it again. :) We will also be using lots and lots of pocket screws and glue for strength and stability. So we purchased a fair stack of 1x planks, 1/4 in. sanded 4x8ft paneling, locktite glue, and some other odds and ends.
Today we moved the camper into my father's shop. Our fall weather in Montana can be very unpredictable and his shop is heated, if need be. Ya! The trick here is that this particular door is abt. 7 feet. The camper is about 6'5" (including the frame underneath, but not from the top to the ground - this is strictly just the camper)...so we ended up having to remove the axel and put the camper on dollies to get in the door. I think we had about an inch or so to spare.
There were only 4 bolts to remove to do this so it should be easy peasy, right? Not so much. Thank goodness for the impact wrench and strong hands. And after grunts, groans, and a good pinched palm that was bleeding for my husband - the good news it that the trailer is in AND there's still room for actual work, so I couldn't be more thrilled. We have decided on our next work day we will remove the left wall to replicate it. The process has definitely begun!
Hard to believe looking at it now that this little thing is what connects the tires to the trailer...
We are mobile once again! We purchased two of these dollies from Harbor Freight for about $15 each and once indoors, it will be really smoothe to be able to move the trailer around on these!
We also purchased this heavy duty trailer dolly. This will come in handy, especially later, when back at our places as we always seem to be moving one trailer or another and it will be great to not have to hook up the pick-up each time.
SQUEEZZZZZZZZE!
As we were inspecting how to tear things down, we did notice that some of the cross braces on the frame have come loose and the sides are sagging but the overall frame *seems* to be straight. So beyond removing the one wall, we're not really sure the process in which we will tear things down to rebuild. We had hoped to rebuild one wall at a time and replace, but if the flooring underneath it all is gone or the frame is bent, then nothing we build will fit. We have not gutted it, hoping those items would provide structural support (and more that we will add), but it appears that gutting it may happen sooner rather than later. So we very well may end up with a stack of walls and roofing premade and ready to put on this trailer. It all depends on if we have to strip her down to bare bones. It's going to become a good snowmobile trailer, as my father keeps saying. (Not if I can help it) :) I would rather do it right than to just patch and momentarily fix and have issues with it later down the road. I can blame my father for that little quirk, so maybe this is a good 'what goes around, comes around' moment for him. Hee, hee.