September 2014.
Buying this camper has been an exciting adventure for us. Us, being mostly me, and I hadn't been set out to do so for very long but the opportunity kind of fell in our lap. Once my husband realized the tools he would be acquiring in order for this remodel to move ahead - now he's on board and then some! Typical male, no? In fact, he is already starting to discuss the 'next' camper! Ha!
Today was a big preparation day. I have been researching, cost comparing, and in general just looking around for supplies and trying to decide on how we want to do this redo. This weekend we started purchasing supplies for the basic structure, as virtually all of what is there is not worth salvaging. The trailer is mainly 1x2s held together by staples, a little glue, and that's about it. Oh - can't forget to throw in a lot of wood rod, some black mold, warping, etc. We went back and forth on whether to beef up the strength of the structure by using 2x2s, 2x4s, compared red wood versus pine, etc. but in the end in the name of weight and cost, we've decided to stay with the 1x stock but will mostly be using 1x3 & 1x4s. And we have decided pine will be fine. The redwood we were finding was poor quality, twisting, bowed, and fairly costly. It survived this long with flimsy wood - I guess it will be a-ok with it again. :) We will also be using lots and lots of pocket screws and glue for strength and stability. So we purchased a fair stack of 1x planks, 1/4 in. sanded 4x8ft paneling, locktite glue, and some other odds and ends.
Today we moved the camper into my father's shop. Our fall weather in Montana can be very unpredictable and his shop is heated, if need be. Ya! The trick here is that this particular door is abt. 7 feet. The camper is about 6'5" (including the frame underneath, but not from the top to the ground - this is strictly just the camper)...so we ended up having to remove the axel and put the camper on dollies to get in the door. I think we had about an inch or so to spare.
There were only 4 bolts to remove to do this so it should be easy peasy, right? Not so much. Thank goodness for the impact wrench and strong hands. And after grunts, groans, and a good pinched palm that was bleeding for my husband - the good news it that the trailer is in AND there's still room for actual work, so I couldn't be more thrilled. We have decided on our next work day we will remove the left wall to replicate it. The process has definitely begun!
Hard to believe looking at it now that this little thing is what connects the tires to the trailer...
We are mobile once again! We purchased two of these dollies from Harbor Freight for about $15 each and once indoors, it will be really smoothe to be able to move the trailer around on these!
We also purchased this heavy duty trailer dolly. This will come in handy, especially later, when back at our places as we always seem to be moving one trailer or another and it will be great to not have to hook up the pick-up each time.
SQUEEZZZZZZZZE!
As we were inspecting how to tear things down, we did notice that some of the cross braces on the frame have come loose and the sides are sagging but the overall frame *seems* to be straight. So beyond removing the one wall, we're not really sure the process in which we will tear things down to rebuild. We had hoped to rebuild one wall at a time and replace, but if the flooring underneath it all is gone or the frame is bent, then nothing we build will fit. We have not gutted it, hoping those items would provide structural support (and more that we will add), but it appears that gutting it may happen sooner rather than later. So we very well may end up with a stack of walls and roofing premade and ready to put on this trailer. It all depends on if we have to strip her down to bare bones. It's going to become a good snowmobile trailer, as my father keeps saying. (Not if I can help it) :) I would rather do it right than to just patch and momentarily fix and have issues with it later down the road. I can blame my father for that little quirk, so maybe this is a good 'what goes around, comes around' moment for him. Hee, hee.
Trailer Trashin' to Glamour Campin'
~*~*~*~*~*~*~*~*~Our adventures in restoration of a vintage 1972 Scotsman Romer camping trailer.~*~*~*~*~*~*~*~*~
Saturday, October 4, 2014
Saturday, September 13, 2014
Let's See What She's Got Under That Hood
September 2014
For the past couple of months, I have been researching where to get new siding for our trailer. Boy, I didn't realize what we were really getting into in terms of the camper world and all the acronyms, nicknames, terms of endearment, etc. that come with this vintage campers. You've got Scotsmans, Scotties, canned hams, Romers, Tear Drops, Shastas, the list goes on and on and on and on. I think I've finally narrowed down that the term "canned hams" is a generic term that speaks to the overall body shape of the trailers from about this time frame (1972) to about 20 years prior. Scotties, Romers, Tear Drops all happen to be specific kinds of these beloved canned hams. (If I have this wrong, someone please inform me!)
As I began doing more research, it came down to two basic types of siding: aluminum and fiberglass. Due to the extreme range of temperatures we can have here in Montana, we decided to stick with aluminum even though it seems to be the most expensive. So then the hunt was on where to buy said siding. We might have been able to get it manufactured from a local machine shop, but I didn't seek one of those out. I began by calling a couple of the local RV dealers to get recommendations of where they would go to complete a project like ours and went from there. One phone call lead to another which lead to another which finally led us to a place called Interstate RV & Metal just outside Portland, OR. Hard to believe there wasn't anywhere closer that wouldn't sell to a regular person, instead I had to be from a business.
Measuring for the siding was another deal. Apparently there are 3 different way to measure. One is when the siding is still on the trailer called the "show" size where you measure only what you can see. The second & third are when it is off the trailer and whether or not you include the particular seam you are going with. This was so very confusing until I had a nice lady willing to walk me through all of it.
So we ordered from here. I hear NOW this it is one of the more expensive places, however they did a fantastic job, the siding is here and we can now get started on our REMODEL! YA!!!
We are trying to make the trailer weather ready before winter hits. But before we can really do anything, we needed to strip her down. Our trailer is apparently a "she", but no name as of yet. Here are some pics of before we dug in:
Once we started the tear down, it went quite rapidly. We found some interesting things along our way. Wasp nests tucked behind tail lights and in the air pipe for the sink, macaroni noodles along the top of the kitchen window, etc. to name a few. Oh - and one really stubborn window to remove as it had been torn out once by a bear. I wonder how old this macaroni is?
And this little gem. I did a little internal happy dance since this is confirmation of what we had been told: this IS a 15' Scotsman Romer! The date is still a little fuzzy. We were told it is a 1972, the title agrees. I'm sad this skin isn't clear, but it's still neat to see. This was written inside the skin on the roof section of the siding we removed!
And this is 3 hours after we started:
Whew!
Ewwww...water damage and no air lead to bad things....That's black mold...along with a lot of rot. Many of the corners literally crumbed in our fingers.
A roof that is caving in. There's just no structural support!
Did I mention water damage?
Ta da! Long story short? We've got lots of work to do. We will be rebuilding from the ground up one wall at a time but with smiles on our faces. Until next time!
For the past couple of months, I have been researching where to get new siding for our trailer. Boy, I didn't realize what we were really getting into in terms of the camper world and all the acronyms, nicknames, terms of endearment, etc. that come with this vintage campers. You've got Scotsmans, Scotties, canned hams, Romers, Tear Drops, Shastas, the list goes on and on and on and on. I think I've finally narrowed down that the term "canned hams" is a generic term that speaks to the overall body shape of the trailers from about this time frame (1972) to about 20 years prior. Scotties, Romers, Tear Drops all happen to be specific kinds of these beloved canned hams. (If I have this wrong, someone please inform me!)
As I began doing more research, it came down to two basic types of siding: aluminum and fiberglass. Due to the extreme range of temperatures we can have here in Montana, we decided to stick with aluminum even though it seems to be the most expensive. So then the hunt was on where to buy said siding. We might have been able to get it manufactured from a local machine shop, but I didn't seek one of those out. I began by calling a couple of the local RV dealers to get recommendations of where they would go to complete a project like ours and went from there. One phone call lead to another which lead to another which finally led us to a place called Interstate RV & Metal just outside Portland, OR. Hard to believe there wasn't anywhere closer that wouldn't sell to a regular person, instead I had to be from a business.
Measuring for the siding was another deal. Apparently there are 3 different way to measure. One is when the siding is still on the trailer called the "show" size where you measure only what you can see. The second & third are when it is off the trailer and whether or not you include the particular seam you are going with. This was so very confusing until I had a nice lady willing to walk me through all of it.
So we ordered from here. I hear NOW this it is one of the more expensive places, however they did a fantastic job, the siding is here and we can now get started on our REMODEL! YA!!!
We are trying to make the trailer weather ready before winter hits. But before we can really do anything, we needed to strip her down. Our trailer is apparently a "she", but no name as of yet. Here are some pics of before we dug in:
Once we started the tear down, it went quite rapidly. We found some interesting things along our way. Wasp nests tucked behind tail lights and in the air pipe for the sink, macaroni noodles along the top of the kitchen window, etc. to name a few. Oh - and one really stubborn window to remove as it had been torn out once by a bear. I wonder how old this macaroni is?
And this little gem. I did a little internal happy dance since this is confirmation of what we had been told: this IS a 15' Scotsman Romer! The date is still a little fuzzy. We were told it is a 1972, the title agrees. I'm sad this skin isn't clear, but it's still neat to see. This was written inside the skin on the roof section of the siding we removed!
And this is 3 hours after we started:
Whew!
Ewwww...water damage and no air lead to bad things....That's black mold...along with a lot of rot. Many of the corners literally crumbed in our fingers.
A roof that is caving in. There's just no structural support!
Did I mention water damage?
Ta da! Long story short? We've got lots of work to do. We will be rebuilding from the ground up one wall at a time but with smiles on our faces. Until next time!
Our new to us 1972 Scotsman Romer!
Purchased in May 2014.
Here is our beauty! Or not so beautiful, but it will be when we are done! This trailer has been owned by 2 other families, of which we know both. How cool is that? So this is a 1972 Scotsman Romer. It is quite unconventional in terms of a Scotsman, since it is missing the traditional "hump" associated with Romers. The company that originally made this trailer went out of business around 1973-1974, so there isn't much literature on this particular camper, at least that I have found.
When we acquired the camper it only had a previous registration inside, which was abbreviated with "ROMR". And to date, I have only found one other Scotsman online similar to ours, but the ebay auction ended in February. As you can see, the siding has been beat completely beat up by hail. It also has a wall protruding, a roof that is caving, and front corners that have been reinforced with metal and rivets which all can only mean one thing....water damage.
I have heard from many to, and I quote, "just remember to enjoy the process". This doesn't bode well for future work days ahead but nonetheless, I am extremely anxious and excited to get this remodel going. My father is helping us and I think he is just as excited. We are luckily in the safety of his shop until we can get the trailer stripped down and once again weather tight.
Let the fun begin!
Subscribe to:
Posts (Atom)